1. Main features of the SBS/APP Modified Bitumen Waterproofing Membrane Production Line
1) Manufacturing Capacity:
Annually manufacturing 10,000,000 m2of various types of modified bitumen waterproofing membrane, as per three shifts per day, 20 hours per working day, 300 days per year, calculated on basis of 3 mm thick membrane.
2) Speed of the production line: 0~30m/min, adjustable. On the basis of producing 3mm membrane.
3) Mechanical speed: 35 m/min.
4) Voltage (according to the voltage in Buyer's country)
2. Membrane to be produced
Compound : Type 01 Softening point : 150 - 155 dc | Recycled Modifier PP, LDPE, IPP, Mineral Oil, Bitumen, Filler. |
Compound : Type 02 Softening point : 120 - 125 dc | Recycled LDPE, SBS, Mineral Oil, Bitumen, Filler |
Compound : Type 03 Softening point : 110 - 115 dc | Recycled Modifier LDPE, PP, Bitumen, Filler |
Reinforcement carriers used : Type 03 | Polyester Mat (Short Fiber, Long Fiber, Reinforced) 120,140,160,180, 200, 250 gsm Fiber glass 50 gsm, 60 gsm Twin carrier, Polyester & fiber |
Product Surfacing : Type 01 Type 02 Type 03 | Top Side Bottom side 7 Mic HDPE Film 7 mic HDPE Film Mineral Chips 7 mic HDPE Film Sand 7 mic HDPE Film |
Product size : Type 01 Type 02 Type 03 Type 04 |
2mm x 1 mts x 10 mts 3mm x 1 mts x 10 mts 4mm x 1 mts x 10 mts 5.5 mm x 1 mts x 10 mts ( Max thickness) |
3. Consumption of the Plant
1) Fuel Consumption: 200×104Kcal/h, thermal efficiency ≥73%.
2) Compressed Air Consumption: 1.6 m3/min, 0.7MPa
3) Capacity of the whole equipment: 700 KW
4) Water usage: 200kg per day
5) Main workshop: L70×W18×H7m
4. The production line consists of six main systems as follow
1) Membrane forming production line
2) Compound preparation system
3) Air compressor system
4) Hot oil conductor furnace system
5) Water cooling system
6) Fume disposing system
5. Labor required
Operators required for the whole production line
1) Boiler room: 1workers
2) Modified workshop: 2 workers
3) Production workshop: 5 workers
The production line will be fabricated in China and shipped with about 11HQ, 9OT and 1FR.
Seller provide installation, commissioning & training services and a warranty of 12 months will be provided after successful commissioning.
After warranty expires, seller provide maintenance service at buyer's cost.
Company Information
About CNBM Group:
CNBM Group is short for China National Building Materials Group Corporation, which is established in 1984 with approval from the State Council.
CNBM Group is the largest comprehensive building materials industry group in China.
Up till end of 2016, CNBM Group has a total assets of over 550 billion RMB, with over 250, 000 employees all around the world. It owns 15 listed companies, 26 national research institutes, over 38000 R & D personnel, 33 national test center, 11 national technology center and 18 national standard draft committee. CNBM Group has been ranked as one of the World Top 500 Enterprises for 7 successive years.
About CNBM Suzhou Waterproofing Institute:
Fully owned by CNBM group, CNBM Suzhou Waterproofing Institute was established in 1984 with the approval of State Construction Materials Industry Administration.
It is a leading professional R&D institute in the waterproof materials and machinery industry in China.
It is a vice chairman of China National Waterproof Building Material Industry Association.
It is responsible for the research & development and consultation for waterproof materials, technical cooperation with enterprises, new products and technology popularization.
It provides waterproof materials manufacturers home and abroad with advanced equipment for production of various waterproof materials with more than 30 years.
It is the host unit of China Building Waterproofing, a openly published professional magazine, and an authoritative service consulting agency in roofing and waterproofing industry.
With its advanced technology & professional service, CNBM has set up more than 20 production lines in oversea countries, such as Saudi Arabia, UAE, Iran, Turkey, India, etc.